101184361 - BNS 260-02Z-ST-R
- Brand: Schmersal
- Product Code: 101184361
Description: Product type description:BNS 260-(1)(2)Z(3)-(4)-(5)(1)111 NO contacts/1 NC contact022 NC contact(2)withoutwith diagnostic output/011 NC contact(3)withoutwithout LED switching conditions displayGwith LED switching conditions display(4)withoutPre-wired cableSTwith connector(5)LDoor hinge on left-hand sideRDoor hinge on right-hand side
Description: Product type description:BNS 260-(1)(2)Z(3)-(4)-(5)(1)111 NO contacts/1 NC contact022 NC contact(2)withoutwith diagnostic output/011 NC contact(3)withoutwithout LED switching conditions displayGwith LED switching conditions display(4)withoutPre-wired cableSTwith connector(5)LDoor hinge on left-hand sideRDoor hinge on right-hand side
Productfeatures
- Connector M8 x 1, 4-pole
- Thermoplastic enclosure
- Small body
- Concealed mounting possible
- 26 mm x 36 mm x 13 mm
- Long life
- no mechanical wear
- Insensitive to transverse misalignment
- Insensitive to soiling
Data
Ordering data
Product type description | BNS 260-02Z-ST-R |
Article number (order number) | 101184361 |
EAN (European Article Number) | 4030661321585 |
eCl@ss number, version 9.0 | 27-27-24-02 |
eCl@ss number, version 11.0 | 27-27-24-02 |
ETIM number, version 7.0 | EC002544 |
ETIM number, version 6.0 | EC002544 |
Approvals - Standards
Certificates | TÜV BG cULus EAC |
General data
Standards | BG-GS-ET-14 IEC 60947-5-3 |
Coding level according to ISO 14119 | Low |
Working principle | Magnetic drive |
Installation conditions (mechanical) | quasi-flush |
Enclosure material | Glass-fibre, reinforced thermoplastic |
Gross weight | 32.3 g |
General data - Features
Number of openers | 2 |
Number of safety contacts | 2 |
Safety classification - Safety outputs
B | 25,000,000 Operations |
Mechanical data
Actuating element | Magnet |
Door hinge | Right |
Direction of motion | Head-on to the active surface |
Mechanical data - Switching distances according EN IEC 60947-5-3
Note (Switching distance Sn) | Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range. |
Assured switching distance "ON" S | 5 mm |
Assured switching distance "OFF" S | 15 mm |
Mechanical data - Connection technique
Type of connection | Connector M8 |
Mechanical data - Dimensions
Length of sensor | 13 mm |
Width of sensor | 26 mm |
Height of sensor | 36 mm |
Ambient conditions
Degree of protection | IP67 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Storage and transport temperature, minimum | -25 °C |
Storage and transport temperature, maximum | +70 °C |
Resistance to vibration to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
Restistance to shock | 30 g / 11 ms |
Electrical data
Voltage type | DC (direct current) |
Switching voltage, maximum | 75 VDC |
Switching current, maximum | 0.4 A |
Switching capacity, maximum | 10 VA |
Switching frequency, maximum | 5 Hz |
Scope of delivery
Scope of delivery | Actuators must be ordered separately. |
Accessory
Recommendation (actuator) | BPS 260 |
Recommended safety switchgear | SRB-E-301ST SRB-E-201LC |
Note
Note (General) | The number in brackets indicate the PIN number of the connector. |
Operating instructions and Declaration of conformity
BNS 260
UL Certificate
(385.0 kB, 08/01/2019)
SISTEMA-VDMA library
(131.9 kB, 12/09/2021)
TraceParts
CADENAS
SISTEMA