Quick Links


Place here any module, widget, design or HTML. for example menu, categories

IIDM

101174456 - SE-P40-NBR10000 VERPACKT GUMMIPROFIL 10M

Description: Product type description:SE-P40 (1)-(2)-(3)(1)withoutUncoated profileCCoated profile (2)withoutMaterial: EPDM, 65 Shore ANBRMaterial: Perbunan® NBR(3)1250Length 1250 mm2500Length 2500 mm5000Length 5000 mm (for uncoated profile only)10000Length 10000 mm (for uncoated profile only)
Description: Product type description:SE-P40 (1)-(2)-(3)(1)withoutUncoated profileCCoated profile (2)withoutMaterial: EPDM, 65 Shore ANBRMaterial: Perbunan® NBR(3)1250Length 1250 mm2500Length 2500 mm5000Length 5000 mm (for uncoated profile only)10000Length 10000 mm (for uncoated profile only)
Productfeatures
  • Dirt and moisture in the profile are to a great extent compensated
  • Insensitive to environmental conditions
  • approx. 40 mm high
Data
Ordering data

Product type description

SE-P40-NBR10000 VERPACKT GUMMIPROFIL 10M

Article number (order number)

101174456

EAN (European Article Number)

4030661303758

eCl@ss number, version 9.0

27-27-06-90

eCl@ss number, version 11.0

27-27-06-90

eCl@ss number, version 12.0

27-27-06-90

ETIM number, version 7.0

EC002887

ETIM number, version 6.0

EC002887

Note (Ordering data)

A switch strip system is assembled from individual components. The components must be ordered separately.

Example:

Rubber profile, SE-P40-1250

Al profile, SE-AL 10-1250

Transmitter/receiver SE-SET

Safety control module, SE-304 C

Optional:

End plugs SE-T40; sticker SE-G8406

Other accessories

General data

Standards

EN ISO 13850

Material of the rubber profile

NBR Perbunan

Gross weight

3,430 g

Mechanical data

Mechanical life, minimum

20,000,000 Operations

Mechanical data - Dimensions

Length

10,000 mm

Width

25 mm

Height, approx.

38 mm

Ambient conditions

Degree of protection

IP67

Note

Note (General)

In the extremities of the safety edge at approx. 60 mm (SE 40) or 50 mm (SE 70) finger guard is not guaranteed. Upon actuation of this area, the transmitter/receiver is pushed into the lower profile section and the switching signal is evaluated, but the required forces are high though. If this restriction is not acceptable for the specific application, constructive measures must be taken.

Mounting and wiring instructions
  • SE-T40 / SE-TC40 / SE-T70 / SE-TC70

    Download
Operating instructions and Declaration of conformity
  • SE-P40 / SE-P70

    Download
TÜV certification
  • SE 414 / SE 421 / SE 443 / SE 714 / SE 721 / SE 743

    Download
Force-travel diagram
  • SE-P40 / SE-P70

    Download
  • TraceParts

    Download