101174453 - SE-P40-NBR1250 VERP.GUMMIPROF.1,25M
- Brand: Schmersal
- Product Code: 101174453
Description: Product type description:SE-P40 (1)-(2)-(3)(1)withoutUncoated profileCCoated profile (2)withoutMaterial: EPDM, 65 Shore ANBRMaterial: Perbunan® NBR(3)1250Length 1250 mm2500Length 2500 mm5000Length 5000 mm (for uncoated profile only)10000Length 10000 mm (for uncoated profile only)
Description: Product type description:SE-P40 (1)-(2)-(3)(1)withoutUncoated profileCCoated profile (2)withoutMaterial: EPDM, 65 Shore ANBRMaterial: Perbunan® NBR(3)1250Length 1250 mm2500Length 2500 mm5000Length 5000 mm (for uncoated profile only)10000Length 10000 mm (for uncoated profile only)
Productfeatures
- Dirt and moisture in the profile are to a great extent compensated
- Insensitive to environmental conditions
- approx. 40 mm high
Data
Ordering data
Product type description | SE-P40-NBR1250 VERP.GUMMIPROF.1,25M |
Article number (order number) | 101174453 |
EAN (European Article Number) | 4030661303727 |
eCl@ss number, version 9.0 | 27-27-06-90 |
eCl@ss number, version 11.0 | 27-27-06-90 |
eCl@ss number, version 12.0 | 27-27-06-90 |
ETIM number, version 7.0 | EC002887 |
ETIM number, version 6.0 | EC002887 |
Note (Ordering data) | A switch strip system is assembled from individual components. The components must be ordered separately. Example: Rubber profile, SE-P40-1250 Al profile, SE-AL 10-1250 Transmitter/receiver SE-SET Safety control module, SE-304 C Optional: End plugs SE-T40; sticker SE-G8406 Other accessories |
General data
Standards | EN ISO 13850 |
Material of the rubber profile | NBR Perbunan |
Gross weight | 710 g |
Mechanical data
Mechanical life, minimum | 20,000,000 Operations |
Mechanical data - Dimensions
Length | 1,250 mm |
Width | 25 mm |
Height, approx. | 38 mm |
Ambient conditions
Degree of protection | IP67 |
Note
Note (General) | In the extremities of the safety edge at approx. 60 mm (SE 40) or 50 mm (SE 70) finger guard is not guaranteed. Upon actuation of this area, the transmitter/receiver is pushed into the lower profile section and the switching signal is evaluated, but the required forces are high though. If this restriction is not acceptable for the specific application, constructive measures must be taken. |
Mounting and wiring instructions
SE-T40 / SE-TC40 / SE-T70 / SE-TC70
Operating instructions and Declaration of conformity
SE-P40 / SE-P70
TÜV certification
SE 414 / SE 421 / SE 443 / SE 714 / SE 721 / SE 743
Force-travel diagram
SE-P40 / SE-P70
TraceParts