852-1411/000-001 - Industrial unmanaged ECO switch; 5 - 10/100/1000 Mb/s RJ45 ports; Power Over Ethernet; Extended temperature range
- Brand: Wago
- Product Code: 852-1411/000-001
Description: The 852-1411/000-001 Switch is an industrial unmanaged ETHERNET switch with 5 Gigabit ETHERNET ports, four of which support Power over Ethernet (PoE+) at 30 W. These 4 PoE+ ports (IEEE 802.3at) can be used simultaneously to power PoE end devices (powered devices). The integrated voltage transformer enables operation with -24 VDC, which is the standard supply voltage in control cabinets. Its slim design paired with a DIN-rail adapter simplifies installation in the control cabinet and provides high vibration and shock resistance. Additionally, automatic transmission rate detection (auto-negotiation) and automatic identification of the transmit and receive lines (Auto MDI-X) allow simple plug-and-play operation, helping save time and money during commissioning. Features: 5 ETHERNET ports 10/100/1000 Mbit/s Autonegotiation 4 PoE+ ports (IEEE 802.3at) Front-panel diagnostic LEDs Supports Auto-MDI/MDI-X functions Full/half-duplex transfer modes for each port Store-and-forward switching method Integrated address look-up table, supports up to 8000 absolute MAC addresses Overvoltage protection IEEE 802.3x flow control in full-duplex mode LED indicator for PoE diagnostics DIN-35 rail mounting
Description: The 852-1411/000-001 Switch is an industrial unmanaged ETHERNET switch with 5 Gigabit ETHERNET ports, four of which support Power over Ethernet (PoE+) at 30 W. These 4 PoE+ ports (IEEE 802.3at) can be used simultaneously to power PoE end devices (powered devices). The integrated voltage transformer enables operation with -24 VDC, which is the standard supply voltage in control cabinets. Its slim design paired with a DIN-rail adapter simplifies installation in the control cabinet and provides high vibration and shock resistance. Additionally, automatic transmission rate detection (auto-negotiation) and automatic identification of the transmit and receive lines (Auto MDI-X) allow simple plug-and-play operation, helping save time and money during commissioning. Features: 5 ETHERNET ports 10/100/1000 Mbit/s Autonegotiation 4 PoE+ ports (IEEE 802.3at) Front-panel diagnostic LEDs Supports Auto-MDI/MDI-X functions Full/half-duplex transfer modes for each port Store-and-forward switching method Integrated address look-up table, supports up to 8000 absolute MAC addresses Overvoltage protection IEEE 802.3x flow control in full-duplex mode LED indicator for PoE diagnostics DIN-35 rail mounting
- Available Quantity: 0
$394.20
Notes
Note | Note UL rating for PoE Budget at Power supply ≥ 48 V DC and 120 Watt PoE Budget or < 48 V DC and 60 Watt PoE Budget |
Technical data
Number of 1000BASE-T ports | 5 |
Communication standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet (PoE) IEEE 802.3at High Power over Ethernet (PoE+) IEEE 802.1p Prioritization |
MAC table (size) | 8000 addresses |
Jumbo frame size | 10000. |
Supply voltage | 24 … 57 VDC |
Power consumption without PoE | 13 |
Full load power consumption | 133 W with 4 PoE |
Baud rate | Copper cable: 10/1000 Mbit/s |
Transmission medium (communication/fieldbus) | Copper cable: Cat. 5e or higher, 100 m maximum cable length |
Topology | Star |
Indicators | Device: LED (PWR) green: Power supply; LED (PoE 1 … 4) green: Power over Ethernet; per port: LED (1000, LNK/ACT) green: Status 1000 Mbit/s, LNK/ACT ports 1 … 5 |
Connection data
Connection technology: communication/fieldbus | Copper cable: 5 x RJ-45 |
Connection technology: supply | 1 x Built-in male connector: 231-432/001-000; included female connector (MCS Connectors): 2231-102/026-000 |
Physical data
Width | 50 mm / 1.969 inches 50 mm / 1.969 inch |
Height | 104 mm / 4.094 inches 104 mm / 4.094 inch |
Depth | 115 mm / 4.528 inches 115 mm / 4.528 inch |
Mechanical data
Weight | 550 |
Color | black |
Environmental requirements
Ambient temperature (operation) | -40 … +70 °C (acc. to CE; -10 … +60 °C acc. to UL 61010) |
Surrounding air temperature (storage) | -40 … +80 °C |
Protection type | IP30 |
Relative humidity (without condensation) | 95 |
Mounting type | DIN-35 rail |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-4 |
Fire load | 0.087 |
Manual
Industrial-ECO-Switch; 5Port Gb; EXT; 4PoE
Bid Text
852-1411/000-001
852-1411/000-001
System Description
Industrial Switches ‒ General Product Information
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 852-1411/000-001
CAE data
ZUKEN Portal 852-1411/000-001
Compliance Search
Environmental Product Compliance 852-1411/000-001